Fire Pump Expansion Joint

Fire Pump Expansion Joint

Fire Pump Expansion Joint – vibration absorber

An expansion joint is a flexible connector that absorbs vibration and noise at the connections between the pump and the piping and prevents pipe stresses from being transmitted to the pump. Connection size, flange standard, working pressure and movement capacity are evaluated together when selecting a fire pump expansion joint.

 

Ayvaz MKTY-30 Metal Bellows Vibration Absorber

According to Ayvaz, vibration absorbers are used at the pump inlet and outlet connections between the piping and the pump. Double-ply bellows vibration absorbers with limit rods prevent pump damage that may result from pipe stresses, absorb vibration and noise at the pump connections and reduce stress and axial misalignment in the system.

The standard MKTY-30 version is manufactured with a double-ply AISI 304 stainless steel bellows, St.37.2 carbon steel flanges and limit rods. With DIN EN 1092/1 PN16 flanges, it has a working pressure of 16 bar and an axial movement capacity of -20/+10 mm. Other bellows materials and flange standards such as ASTM and BS are available on request.

Ayvaz also manufactures rubber expansion joints for pump connections on the suction and discharge lines. Easy to install, the vibration absorbers take up little space in the pump room.

Fire Pump Expansion Joint Technical Specifications

SpecificationValue
ModelMKTY-30 – double-ply bellows, flanged vibration absorber with limit rods
Nominal SizeDN25 – DN300
Working Pressure16 bar
Axial Movement-20 / +10 mm
Flange StandardDIN EN 1092/1 PN16
Bellows MaterialAISI 304 stainless steel (options: 309, 316L, 316Ti, 321)
Flange / Rod MaterialCarbon steel St.37.2
Length (L)110 – 150 mm (depending on size)

Technical values are based on manufacturer documents; confirm against the current data sheet before ordering.

Fire Pump Expansion Joint Applications

Fire pump suction and discharge flange connectionsFire pump suction and discharge flange connections
Vibration isolation at pump, motor and compressor connectionsVibration isolation at pump, motor and compressor connections
HVAC and industrial facility pipingHVAC and industrial facility piping

Related Fire Pump Accessories

Other equipment considered together with the Fire Pump Expansion Joint in the fire pump room:

Frequently Asked Questions

Why is an expansion joint used on a fire pump?
It absorbs vibration and noise at the pump inlet and outlet. By preventing pipe stresses from being transmitted to the pump, it helps avoid potential pump failures.
In which sizes is the MKTY-30 manufactured?
In the standard table it is manufactured in sizes from DN25 to DN300. Special designs are available on request.
What is the working pressure?
The working pressure of the standard MKTY-30 version is 16 bar.
What is the bellows material?
The standard bellows material is AISI 304 stainless steel. Grades 309, 316L, 316Ti and 321 are available on request.
Is installation difficult?
According to the manufacturer, vibration absorbers are easy to install and take up little space at the pump connection.
Is this product FM approved?
The manufacturer's FM certificate covers the U-Flex and V-Flex expansion loops for fire lines. No FM or UL approval is stated for the MKTY-30. If the project requires an approved product, selection should be made together with us.
Do you need more information about this solution?
Contact Us


Chat with us on WhatsApp